• Products
>
Measurement
>
0-10V, 4-20mA, ...
>
RS232/RS485
>
AD4RS - RS232/485 measurement module
>
AD4RS - RS232/RS485 measurement module
Variant: AD4RS_U - For Voltage 0-10V DC
|
Action:
|
Variants:
AD4RS_I - For current 0(4) - 20 mA
Version with four inputs for unified signal 0 to 20 mA, 4 to 20 mA respectively.
AD4RS_C - Custom input ranges
Input ranges can be changed to input voltages of your choosing. Please contact us with concrete required parameters.
Description
Analog measurement module AD4RS is a four input A/D converter allowing you to measure up to four analogue signals 0-10V or 0(4)-20mA. Measured out values are send to a PC or other system by means of RS232 or RS485 line.
Default input range is 0-10V or 0(4)-20mA, but it ican be modidied to suit your application upon request. Please contact us to get a custom measuring range.
Features of A/D converter with serial lines
- Four analogue inputs for voltage or current
- Each channel can have different range (upon request)
- Measuring range split into 10 000 pieces
- Mesuring rate: twice in a second for each channel
- Communication via RS232 or RS485 line
- Spinel and Modbus RTU communication protocols (MODBUS documentation on request).
- Measuring software for watching and logging is supplied as a freeware
- Wide power supply voltage range: 7 - 30 V DC
- Measuring is based on a single multiplexed 16 bit sigma-delta A/D converter
AD4RS Messurement module posibilites
Usage of ADC
- Digitalization of measured-out values from gauges with unified voltage or current ouput
- Reading or sensors with unified signals
- Reading values from flood sensors, pressure sensors, thermometers, height sensors etc.
Images
AD4RS - RS232 a RS485 measurement mobule
AD4RS function block diagram
RS485 a RS232 connectors
Analog Inputs and power connector
Downloads
ad4xxx-drak4-modbus-rtu.pdf
Communication protocol MODBUS RTU used in AD4 and Drak 4
File size: 470 kB
Date: 02-07-2011
ad4-drak4-spinel.pdf
AD4xxx Spinel protocol description + hysteresis principals footnote + instructions how to switch the protocol.
File size: 1 MB
Date: 09-16-2011
ad4setup.exe
Configuration software for AD4xxx devices. AD4RS, AD4USB and Drak 4. Current values are displayed. (Note: If your device is set to communication speed other than 9600 od 115200 bps, you will have to execute ad4setup with parameter baudrate: AD4setup.exe baudrate=[your speed] )
File size: 661 kB
Date: 02-08-2011
sw-wix-free.zip
Wix - Free version of measurement software, version 1.7.5.0
Software for measurement, storing values, controlling and viewing measured-out values from Papouch s.r.o. devices (or others if integrated with for example MODBUS).
(Restrictions in the free version can be removed by purchasing a license.)
Go to Wix main page...
File size: 1.9 MB
Date: 03-19-2012
tqs-scanner.zip
Searching utility. This will search your RS485 line and find all devices with Spinel protocol you have connected. It can also switch TQS3 to TQS1 mode and vice versa.
File size: 506 kB
Date: 03-11-2011
Related products
Do you have any question or a suggestion? We would like to hear it!
If you have any question, suggestion or just a note, we are pleased to hear all about it! Just write it in the following form and send it, simple as that. You can also contact us or our distributor by phone or e-mail, all can be found in contacts.