• Products >
Wie232 converts Wiegand protocols to a format suitable for a serial port (RS232, COM port). The output of Wie232 is the number of the card read by the reader in the form of text in the ASCII format or in binary format. This enables further processing of the card number by a PC software or another system to be carried out very easily.
Price: 99 € ex VAT
CQ485 is an RS485 and RS422 repeater, converter and isolator in one device. Both sides are galvanically isolated. Easy setup software included
Price: 118 € ex VAT
Set for extending RS232 line, maximum working distance 1200m, surge supression, galvanic isolation.
Price: 236 € ex VAT
US232 is a complete isolator of all RS232 signals. Over voltage protection. It can also be used as repeater, or just to enhance the RS232 signal.
Price: 52 € ex VAT
Analog measurement module AD4RS is a four input A/D converter allowing you to measure up to four analogue signals 0-10V or 0(4)-20mA. Measured out values are send to a PC or other system by means of RS232 or RS485 line.
Price: 138 € ex VAT
Analog measurement module AD4ETH is a four input A/D converter allowing you to measure up to four analogue signals 0-10V or 0(4)-20mA. Measured-out values can be viewed via a WEB interface, AD4ETH also supports TCP, SNMP, Modbus and many other protocols.
Price: 198 € ex VAT
AD4USB measuring converter is a 4-input A/D converter which enables the user to measure to four current inputs ranging from 0(4) to 20 mA or voltage between 0 and 10 V. The measured values are then transferred to a superior system in digital form. The AD4USB communicates via USB. Powered is also via USB.
Price: 146 € ex VAT
TM is a cheap RS232 serial thermometer with measuring range from -55°C through +125°C. It communicates in a simple ASCII format.
Price: 17 € ex VAT
Digital thermometer and hygrometer with a dew point calculation. THT2 communicates via RS485 line. IP54 coverage suitable for outdoor use. Multiple sensors can be connected to RS485 bus. Communicating distance is up to 1,2 km.
Price: 36 € ex VAT
Sensor for temperature and humidity with dew point calculation. Comunication via RS485 line. In plastic box with vent holes specified for interiors. You can mount it on wall or ceiling.
Price: 78 € ex VAT