Main menu:

Contact

Papouch store s.r.o.
Strasnicka 3165/1b
102 00 PRAGUE 10
Czech Republic

Telephone:

+420 267 314 267

Fax:

+420 267 314 269

info@papouch.com

Skype:

Payments

In our e-shop you can also pay by credit cards MasterCard®, Maestro®, VISA® and VISA Electron®.
Additional Options

Links

Downloads:

Downloads...


Products > Measurement >

Measurement

Choose subcategory:

Thermometers and Hygrometers0-10V, 4-20mA, ...Anemometers

Products


Page: 1 | 2 | 3
TDS - Industrial thermometer

TDS - Industrial thermometer

TDS thermometer can display temperature measured by TQS3 thermometers, that communicate via RS485 line and can be up to 1200m away from it. Temperature is displayed on a 7-segment LED display. In this way you can read-out up to three temperatures in different locations. TDS Thermometer works as an independent device without the need to be connected to a PC.

Price: 60 € ex VAT

PRODUCT DETAIL

TQS3 M - RS485 Thermometer with the probe on a cable

TQS3 M - RS485 Thermometer with the probe on a cable

Digital RS485 thermometer with the sensor on 3m silicon cable. Main electronics is separated from the sensor so it is suitable for temperature measurement is constrained areas. Measuring range is -55 to +125 °C. Thermometer communicates via RS485 line on Spinel or ModBus RTU protocol.

Not available

PRODUCT DETAIL


TMU - USB thermometer

TMU - USB thermometer

TMU is a USB thermometer. It measures in range of -55°C through +125°C. USB thermometer communicates via a simple ASCII protocol. It enables you to read the temperature directly with no other conversion.

Price: 38 € ex VAT

PRODUCT DETAIL

TME - Ethernet Thermometer

TME - Ethernet Thermometer

TME is a Thermometer with direct output to Ethernet (IP Thermometer), Measuring range is -55°C to +125°C. No conversion needed.

Price: 119 € ex VAT

PRODUCT DETAIL


TH2E - Ethernet thermometer and hygrometer

TH2E - Ethernet thermometer and hygrometer

TH2E is a Thermometer and Hygrometer that can calculate a dew point. It can store measured-out values into its internal memory, send the measured-out values to your server, send e-mails when a threshold is exceeded, TH2E remembers extremes and it has an internal WEB server. TH2E is fully configurable via its WEB interface. SNMP and MODBUS TCP are also supported.

Price: 112 € ex VAT

PRODUCT DETAIL

Papago 2TH ETH: 2x temperature, humidity and dew point with Ethernet

Papago 2TH ETH: 2x temperature, humidity and dew point with Ethernet

Ethernet interface with PoE power supply for two combined sensors. It measures only temperature or temperature, humidity and dew point. Temperatures measured in the range from -55 to +125 °C.

Price: 151 € ex VAT

PRODUCT DETAIL


TME multi: Temperature and humidity via Ethernet

TME multi: Temperature and humidity via Ethernet

A device for measuring temperature and humidity at up to 32 locations. Configuration and preview of all measured values via a website. TME multi is able to send the current values to the server using HTTP GET requests and can also communicate via SNMP and Modbus TCP protocols. When the critical limits are exceeded the system sends e-mail warnings or SNMP traps.

Price: 119 € ex VAT

PRODUCT DETAIL

Temperature and humidity sensor

Temperature and humidity sensor

Temperature and humidity sensor for TH2E, THT2 and Papago. Cable length by variant.

Price: 36 € ex VAT

PRODUCT DETAIL


Temperature sensor

Temperature sensor

Temperature sensor for TH2E, THT2 or TME PoE. Silicon cable, length by varinat.

Price: 24 € ex VAT

PRODUCT DETAIL

WindETH - Ethernet anemometer

WindETH - Ethernet anemometer

WindETH is an Ethernet anemometer, which is able to measure wind speed and direction. Current measurements are also available via internal WEB interface or various formats like HTTP GET, XML, MODBUS TCP, SNMP and Spinel. When limits are exceeded WindETH is able to notify the operator via e-mail.

Price: 212 € ex VAT

PRODUCT DETAIL



Page: 1 | 2 | 3

Files: